|
|
 |
 |
|
Sheet-Panelled Access Floor single-layer
GIFAfloor FHB
When it comes to saving time when laying the floor.
The construction design of the F181 system consists of single-layer GIFAfloor FHB gypsum fibre elements laid on steel supports in the format 600 x 1200 mm. The elements are laid out of phase and are ready overnight with their flat sanded surface for almost any top surface. They have standard thicknesses of 25, 28, 32 and 38 mm and are equipped with tongue and groove edges. The individually adjustable supports are stuck together mostly in the pattern of 600 x 600 mm with the plenum.
For the maintenance or post-provision of the under-floor laid mains, the electrics, outlets and change openings can also be installed later in any position on the floor. Through the high laying output, this single-layer sheet-panelled floor enables the quickest construction development. Accessible at all times, installation occurs through the immediate or later combination with Knauf Integral GIFAfloor DB raised access floor panels, for example in corridors or as an installation route.
Of course drywalls can also be installed on the GIFAfloor FHB sheet-panelled access floor.
The sheet-panelled access floor single-layer GIFAfloor FHB is particularly suitable for cut-off intensive and small rooms..
 |
|
| Back to top |
|
|
|
|
|
|
 |
|
| Change valve and electrics in the GIFAfloor FHB |
|
 |
|
| Support and joint |
|
|
|
|
|
|
|
|
|
|
